| Home  | About ScienceAsia  | Publication charge  | Advertise with us  | Subscription for printed version  | Contact us  
Editorial Board
Journal Policy
Instructions for Authors
Online submission
Author Login
Reviewer Login
Volume 51 Number 5
Volume 51 Number 4
Volume 51 Number 3
Volume 51S Number 1
Volume 51 Number 2
Volume 51 Number 1
Earlier issues
Volume  Number 

previous article next article

Research articles

ScienceAsia 51S (2025):ID 2025023 1-8 |doi: 10.2306/scienceasia1513-1874.2025.s023


Investigation of oxygen evolution reaction using a co-doped Ir/Sb-SnO2 as electrocatalytic electrode materials


Supandee Maneeloka,*, Chakkrapong Chaiburib, Chontira Sangsubunc, Pierrot S. Attidekoud

 
ABSTRACT:     Iridium antimony-doped tin oxide (Ir/ATO) is a promising catalytic material for the anodic oxygen evolution reaction (OER), a significant challenge in clean energy technologies such as energy storage, energy conversion, and electrolysis. In this study, Ti/Ir/ATO electrodes were fabricated using the dip coating method with various Ir concentrations at different calcination temperatures. The oxygen evolution reaction was evaluated. The material properties were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), Energy dispersive X-ray spectroscopy (EDX), X-ray photoelectron spectroscopy (XPS), and Cyclic voltammetry (CV). The Ir/ATO materials exhibit a single-phase tetragonal structure with nano-sized particles ranging from 8.2 to 24 nm as a function of doping at 550?C. The spherical particles and EDX mapping show uniformly distributed Ir and Sb atoms over tin oxide with no aggregation. XPS spectra of Ir/ATO calcined at 550?C showed the presence of Sn4+ and both Sb3+ and Sb5+. The highest Sb3+ peak area of 2.5% Ir/ATO suggests enhanced kinetics due to substitution and increased number of electrochemically active sites. With regard to OER performance, the CV performed on a 2.5%Ir/ATO catalyst exhibits a cathodic surface oxide reduction peak around ca. 0.47 V (vs. Ag/AgCl) with a current density of 2.03 mA cm?2 and a surface oxidation onset around E = 0.8V. Furthermore, an onset potential for the OER can be observed at ca. 1.4 V, indicating superior OER properties.

Download PDF

Downloads Views


a Department of Occupational Health and Safety, Faculty of Health and Sports Science, Thaksin University, Phatthalung 93210 Thailand
b Faculty of Engineering, Thaksin University, Phatthalung Campus, Phatthalung 93210 Thailand
c Department of Physical Sciences, Faculty of Science and Digital Innovation, Thaksin University, Phatthalung 93210 Thailand
d School of Chemistry, University of Birmingham, Birmingham B15 2TT United Kingdom

* Corresponding author, E-mail: msupandee@tsu.ac.th

Received 30 Nov 2024, Accepted 0 0000