| Home  | About ScienceAsia  | Publication charge  | Advertise with us  | Subscription for printed version  | Contact us  
Editorial Board
Journal Policy
Instructions for Authors
Online submission
Author Login
Reviewer Login
Volume 44 Number 3
Volume 44 Number 2
Volume 44 Number 1
Volume 44S Number 1
Volume 43 Number 6
Volume 43 Number 5
Earlier issues
Volume 44 Number 2 Volume 44 Number 3

previous article next article

Research articles

ScienceAsia 44(2018): 212-217 |doi: 10.2306/scienceasia1513-1874.2018.44.212


p-Xylene catalytic oxidation to terephthalic acid by ozone


Helin Pan*, Shuting Li, Mingjie Shu, Yuwei Ye, Qiuhua Cui, Zhixiang Zhao

 
ABSTRACT:     The process of p-xylene (PX) catalytic oxidation to terephthalic acid (TA) was studied at 60–110 °C and atmospheric pressure with cobalt acetate as catalyst, glacial acetic acid as solvent, and ozone-containing air as oxidant. Effects of catalyst, temperature, ozone concentration, reaction time, and bromide on PX conversion and product selectivity were investigated. Results showed that PX was oxidized with 76% conversion and 84% selectivity for TA at 80 °C under 63.0 mg/l ozone concentration for 6 h at 0.8 l/min gas flow rate when the mole ratio of PX to cobalt acetate was 10:1. PX conversion and TA selectivity could reach 96% and 84% when the mole ratio of PX to KBr was 1.84:1. When cobalt acetate, ozone, and bromide were simultaneously used, an obvious synergistic effect on the PX oxidation reaction was noted. Increasing the temperature gradually weakened the effect because the decomposition rate of ozone was accelerated.

Download PDF

14 Downloads 43 Views


School of Chemical Engineering, East China University of Science and Technology, Shanghai 200237 China

* Corresponding author, E-mail: panhl@ecust.edu.cn

Received 20 Mar 2018, Accepted 20 Jul 2018