Research articles
ScienceAsia 39 (2013): 520-526 |doi:
10.2306/scienceasia1513-1874.2013.39.520
Changes in friction, surface roughness, and tensile strength upon compaction of Ficus deltoidea powder
T.C. Ooia, Y.A. Yusofa,*, N.L. China, R.A. Taliba, S.H. Othmana, M.G. Aziza,b
ABSTRACT: The study is concerned with the quantitative measurement of changes in friction, surface roughness, and tensile strength during the compaction of Ficus deltoidea powder, a well-known Malaysian herb. In the compaction process, the force applied for compaction (upper punch fake Rolex watches) was greatly influenced by the friction between die wall and powder bed during transmission to the lower punch. Wall friction was found to increase with the increasing load and weight of powder due to an increase in surface contact with the die wall. The coefficients of wall friction decreased from 0.47 to 0.36 for increasing weight of powder from 0.8-1.5g. Tablets with a higher compaction load of 9.5 kN had a lower arithmetic mean deviation (Ra), an indicator of surface roughness. Ra for the top surface is lower than that of for the bottom surface.
Download PDF
6 Downloads 1246 Views
| a |
Department of Process and Food Engineering, Faculty of Engineering, Universiti Putra Malaysia, 43400, Serdang, Selangor, Malaysia |
| b |
Department of Food Technology and Rural Industries, Bangladesh Agricultural University, Mymensingh-2202, Bangladesh |
* Corresponding author, E-mail: niza@eng.upm.edu.my
Received 27 Jul 2012, Accepted 12 May 2013
|
